Perancangan Alat Pemberi Pakan Ikan Otomatis Menggunakan Arduino Berbasis Android (Studi Kasus : Toko Arapaima Aquarium)
DOI:
https://doi.org/10.35134/komtekinfo.v7i4.88Keywords:
IOT (Intenet of Thing), Android, MQTT (Message Queuing Telemetry Transport), ArduinoAbstract
Feeding fish is the most important thing in raising fish, with regular feeding to fish the fish will be able to continue to breed, In general, the process of feeding still requires human resources that are still manual, so that it will be difficult and disrupt human activity itself, if the process carried out must spread the food in the aquarium when someone is not in place, Therefore, currently IOT (Internet of Thing) technology has been developed which can facilitate human activities with remote control systems. The process of feeding with a remote control system is done using android, so as to simplify and save someone's time in the process of feeding without having to be in place. The control system used is Arduino ESP8266 as a single board micro controller platform, so that the control device can function to connect the WI-FI network. The process of connecting an Arduino ESP8266 device with a smartphone is done using the broker as hosting, the broker used was MQTT (Message Queuing Telemetry Transport), MQTT is a protocol that runs on the TCP / IP stack and is designed specifically for machine to machine that does not have a specific address. MQTT broker's working system is to implement publish as data sender, subcribe as data recipient, and topic as hosting data broker.
References
Ahlina, Nuril. 2015. “Dengan Adanya Gangguan, Sistem Kontrol Lup Terbuka Tidak Dapat Bekerja Seperti Yang Diinginkan. Kontrol Lup Terbuka Dapat Digunakan Dalam Praktek Hanya Jika Hubungan Antara Masukan Dan Keluaran Diketahui Dan Jika Tidak 5.” 5–64.
Anisah, Nurlaili, Ummu Radiyah, and Anton. 2016. “RANCANGAN SISTEM INFORMASI E-RECRUITMENT.” 3(2):1–7.
Ayu, Wirenda Sekar, Rizky Septendhi, Bayu Azi, Mervin T. Hutabarat, and Yana S. Raharja. 2018. “Android Application Design of Automatic Tablet Dispenser Using MQTT Protocol Communication.” [4] Galadima, Ahmad Adamu. 2014. “Arduino as a Learning Tool.”
Hunkeler, Urs, Hong Linh Truong, and Andy Stanford-clark. 2008. “MQTT-S – A Publish / Subscribe Protocol For Wireless Sensor Networks.”
Jumalli, Selamat and Usman M Tang. 2013. “The Modificated of Automatic Feeder for Increasing Effectiveness of Fish Meal in Take.”
Muhammad, Muhammad and Ibrahim Hasan. 2016. “ANALISA DAN PENGEMBANGAN JARINGAN WIRELESS BERBASIS MIKROTIK ROUTER OS V . 5 . 20 DI SEKOLAH DASAR NEGERI 24 PALU.” 2(1).
Nulhakim, Lukman. 2014. “OTOMATIS BERBASIS MIKROKONTROLER ATMEGA16.”
Nur, Hidayatul, Binti Hasim, and Mritha Ramalingam. 2017. “Developing Fish Feeder System Using Raspberry Pi.”
Suendri. 2018. “Implementasi Diagram UML (Unified Modelling Language) Pada Perancangan Sistem Informasi Remunerasi Dosen Dengan Database Oracle (Studi Kasus : UIN Sumatera Utara Medan).” 6341(November):1–9.
Syafa, Lailis, Agus Eko Minarno, Fauzi Dwi, Setiawan Sumadi, Dwi Anggraini, and Puspita Rahayu. 2019. “ESP 8266 For Control And Monitoring In Smart Home Application.” 2019 International Conference on Computer Science, Information Technology, and Electrical Engineering (ICOMITEE) 1:123–28.
Syarif, Muhamad, Wahyu Nugraha, Program Studi, Sistem Informasi, Akuntansi Kampus, Kota Pontianak, Fakultas Teknologi Informasi, Universitas Bina, Sarana Informatika, and Kalimantan Barat. 2020. “PEMODELAN DIAGRAM UML SISTEM PEMBAYARAN TUNAI PADA TRANSAKSI E-COMMERCE.” 4(1).
Weku, Hendra S., Eng Vecky C. Poekoel, Reynold F. Robot, and M. Eng. 2015. “Rancang Bangun Alat Pemberi Pakan Ikan Otomatis Berbasis Mikrokontroler.” 5(7):54–64.
Widya, Adi Rusdi, Ahmad Turmudi Zy, Teknik Informatika, Universitas Pelita Bangsa, and Teknik Informatika. 2019. “PERANCANGAN MONITORING MACHINE CONDITION DENGAN.” (September).
Xia, Feng, Laurence T. Yang, Lizhe Wang, and Alexey Vinel. 2012. “Internet of Things.” 1101–2
KomtekInfo has launched a new template since Vol. 12, No. 2, (2025)
